![]() These screws have now been relocated for easy access, please find the three red arrows located inside the printer and NOT underneath, remove these screws.Ĭarefully connect the ribbon cable to the touchscreen. Please note that in the video, the screws are underneath the printer this has now been changed. Open the front glass door and remove the three screws that hold the bed in place. Note: Gently position the extruder head to the center. Remove the cardboard protection around the extruder, then remove the white foam inside the purge bucket. ¶ Step 7 - Removal of Extruder's Cardboard Protection and Foam from Purge Box Don't worry, you won't break it if you removed the screws in the previous step. You might need to pull a bit harder to get it out from the plastic holder. Credit: RuiRaptorĬarefully lift the AMS from the printer. Open the front glass door, and using the H2 Allen Key from the accessories box, remove the two screws in the front holding the AMS in place during shipping. Take out the cardboard box which includes all the accessories for the X1-Carbon Combo ¶ Note: The top lid is fully detachable from the base, please take extra precautions when handling. Remove the top glass cover to reach the protection foam holding the AMS attachment safe during shipping. Remove the plastic cover and the green stickers from the printer. Note: The printer weights approximately 20kg Remove the printer from the box by using the two plastic handles as shown below, and place the printer on a flat surface ![]() Visit YouTube or Bilibili to watch our full assembly video. The filament and other accessories in the Combo are given randomly, please refer to the specific goods you receive. The screws are no longer located as shown in the video, please refer to the image displayed in step 8 of the guide below.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |